1. Introduction
OP6000A seriesis the latest optical isolated voltage probe with remarkably high CMRR. The CMRR of traditional differential probe decreases fast in high-frequency range, as a result, measuring the small voltage signal waveform (e.g., the driving voltage when measuring the upper MOSFET of the half-bridge circuit) under high CM interference voltage accurately become a extremely hard task. OP6031/6032 applies optical isolation technologies and gains remarkably high CMRR in all working bandwidth, helping our customers to deal with these kinds of challenging measurement with low cost.
1. Electric Specification
Model | OP6031A | OP6033A | OP6035A | ||||
Bandwidth(-3dB) | 150MHz | 350MHz | 500MHz | ||||
Rise time | ≤ 2.3ns | ≤ 1.0ns | ≤ 0.7ns | ||||
Typical values of host noise (Vrms) | 2.5mV | 2.5mV | 3mV | ||||
Terminal impedance | 1MΩ | ||||||
Output voltage range | ±1.5V | ||||||
DC precision | ≤±1%（0~40℃） | ||||||
Range Selection (Attenuation Ratio) | CK-AT2XB | CK-AT20XB | CK-AT500XB | CK-AT2000XB | |||
Maximum Differential Voltage under Test (DC + Peak AC) | ±3V | ±30V | ±500V | ±2500V | |||
Isolation Voltage (DC + Peak AC) | ±60kV | ||||||
Input Impedance | 2X | 1MΩ//16pF | |||||
20X | 1MΩ//6pF | ||||||
500X | 10MΩ//3pF | ||||||
2000X | 10MΩ//3pF | ||||||
Delay Time | Host | About 13ns | |||||
BNC(1m) | 5ns | ||||||
CMRR Typical Value (Using 20X plug connector and SSMB socket) | DC-10MHz | 160dB | |||||
10MHz-100MHz | 100dB | ||||||
100MHz-300MHz | 90dB | ||||||
300MHz-500MHz | 80dB | ||||||
Battery specifications | Capacity | 7.4V/950mA | |||||
Operating Time | About 8h | ||||||
Standby time | About 30 days | ||||||
Rear-end Power Supply | USB 5V/2A | ||||||
Auto-zero set function | YES | ||||||
